How To Soundproof A Studio
Soundproofing is a crucial aspect that you must give top priority to when setting up a recording studio for music production, podcasting, or other types of audio work. Your audience could detect if you recorded in a setting that wasn’t suitable for working with sound, even if you used the most costly recording equipment. For the best audio recording, you should give knowing how to soundproof a room priority.
You must prevent outside sounds from being heard or recorded if you want to make the most of your equipment and only create professional audio. Fortunately, effective soundproofing allows you to keep your noise inside and spare your neighbours’ annoyance. Therefore, how can you soundproof a space like a recording studio? Discover the four soundproofing techniques listed below, along with some helpful tips.
To Create a Quiet Environment, Use Insulation.
The finest furniture for your room is bass traps, sound-absorbing panels, and acoustic foam tiles. Most home improvement retailers carry cork, rubber, and foam panel insulation. In addition, echo and boom can be reduced using DIY techniques, such as draping thick blankets or heavy curtains on walls and corners.
Soundproof Doors
Soundproof doors are a great way to block sound in your studio. Of course, a stronger door is preferable, and if yours is hollow, you can fill it with spray insulation. Installing a door sweep on either side of the door can close the air gap between the door and the floor.
Make A Floating Floor Or Buy Thick Carpet
Putting down thick carpeting or rugs will improve the floor. Building a floating floor that absorbs sound waves is a more efficient solution, but it needs expert help. Adding a new layer of flooring disconnected from your existing floor using firm rubber pucks or floor floaters is the simplest way to create a floating floor. To float your existing floor is a more challenging and expensive choice. Still, accessing the joists beneath your sub-flooring is only possible in some areas.
Your Walls Should Have A Second Layer Of Drywall That Is Sheet-Block Lined
Consider adding a second layer of drywall to your wall as a sound barrier.If your walls are made of plasterboard, and you’re willing to hire professional construction assistance, then it might be worth it. Leave an air gap between the two walls and install sheets of mass-loaded vinyl or sheet block inside the new layer of drywall. Sound waves cannot enter or leave your walls through the sheet block or the second wall.
Apply Acoustic Sealant
When constructing your wall frames and hanging drywall, you can use this acoustic sealant that has been carefully formulated. It is the best method for reducing noise in a space. It will hold materials together while damping bass vibrations as long as you use enough to increase soundproofing, you can also use regular caulk to seal any tiny seams, cracks, or holes in the walls and windows.
Some caulks can be painted over because they are water-based, making them simpler to clean and conceal if they don’t match the colour of your walls.
Reasons To Soundproof A Studio
For the following reasons, studio soundproofing is essential to creating high-quality recordings:
Reduce External Noises
Soundproofing stops external noises from affecting recordings, so you don’t have to worry about noises from planes, cars, people, the weather, animals, etc.
To Reduce Internal Noises
When recording audio, it’s not just outside noise that can cause issues; disturbances inside your recording studio can also sabotage a session. Soundproofing reduces noises produced by heating and cooling units, computer fans, keyboard clicks, recording devices, etc.
To Lessen Echo
In a small room, certain soundproofing materials can cut down on echoes.
To Produce Audio Of The Highest Quality
Whether you’re recording music, a voice-over, or a video of an acting audition, you want to keep obtrusive noises out of the mix. Soundproofing your recording room is essential if you want to succeed professionally in your chosen creative sector and sound like one when you record.
Contact Us
When it comes to creating a space for high levels of noise created by music, whether by converting your existing garage or shed or if you are venturing into a new build, we recommend building a room within a room.
This method would create a soundproof structure that isolates your existing structure and gives you the best starting point.
If this isn’t an option for you, there are products that you can introduce that would help reduce some of the noise but not completely remove it. So for all our solutions, please give us a call.